New 3033R Compact Utility Tractor

Specifications

Engine power (gross)	23.7 kW 32.2 hp PS at 2600 rpm SAE J1995 rated power
Power take-off (PTO) power	PRT - 19.5 kW 26.1 hp eHST - 17.2 kW 23 hp Per SAE J1995
Steering hydraulics	23.5 L/min 6.2 gpm
Implement hydraulics	34.3 L/min 9.1 gpm
Hitch type	Category 1
Lift capacity, 24-in. behind link arms	995 kg 2194 lb
Standard transmission; forward/reverse	PowrReverser transmission (PRT)
Cruise control	Standard
Approximate shipping weight (open-station; cab)	Rollover protective structure (ROPS) - 1315.4 kg 2900 lb Cab: 1619.3 kg 3570 lb
Wheelbase	172.7 cm 68 in.

Family	EYDXL1.64NDA FYDXL1.64NDA GYDXL1.64NDA
Manufacturer	Yanmar
Engine model	3TNV88C-MJT
Engine power (gross)	23.7 kW 32.2 hp PS at 2600 rpm SAE J1995 rated power
Power take-off (PTO) power	PRT - 19.5 kW 26.1 hp eHST - 17.2 kW 24.3 hp Per SAE J1995
Rated engine speed	2600 rpm
Type	Diesel
Injection pump type	High pressure common rail direct injection
Aspiration	Natural
Emissions compliance	Final Tier 4
Cylinders/displacement	3 / 1.64 L 3 / 100 cu in.
Number of cylinders	Three
Cylinder liners	Cast-in-block
Bore and stroke	88x90 mm 3.46x3.54 in.
Compression ratio	19.1:1
Lubrication	Pressurized
Cooling system	Liquid
Air cleaner	Dual element
Engine torque at rated speed	87 Nm 64.2 lb-ft
Fuel tank capacity	Rollover protective structure (ROPS): 37.4 L 10 U.S. gal. Cab: 47.6 L 12.6 U.S. gal.

Battery size	500 CCA
Alternator (12-V)	75 amp
Starter size	1.4 kW 1.9 hp

Type	High pressure common rail direct injection
Fuel consumption	7.6 L/hr 2 U.S. gal.

Standard transmission; forward/reverse	PowrReverser transmission (PRT)
Optional transmission; forward/reverse	PRT only
Left-hand reverser	eHydro transmission (eHST)
Transmission gear ranges	12F/12R PowrReverser (PRT) 3-range, infinitely variable
Final drive	Bull Gear
Brakes	Multi-plate wet disc
Steering	Hydrostatic power steering
Clutch, wet/dry	Wet disc
Clutch disk diameter wet clutch
Axle capacity	Front 1450 kg 3197 lb Rear 1850 kg 4079 lb
Creeper	SpeedMatch optional
Cruise control	Standard
Differential lock	Yes
Drawbar maximum vertical load

Type	Open center
Pump rated output	Steering 23.5 L/min 6.2 gpm Implement 34.3 L/min 9.1 gpm 57.8 L/min 15.3 gpm
Pump type	Single gear
Maximum operating pressure	172.4 bar 2500 psi
Draft control sensing	Position control
Remote control valves available	Up to six rear remotes

Type	Category 1
Lift capacity, 24-in. behind link arms	995 kg 2194 lb

Standard	Independent Rear - 540 rpm
Optional	Mid - 2100 rpm
Control	Position control
Clutch	Wet disc
Brake (for mid and rear PTO)	Wet disc
Engagement method

Crankcase with filter	4.3 L 4.5 qt
Transmission and hydraulic system	24.6 L 6.5 U.S. gal.

Type	Bull Gear
Differential lock

Rollover protective structure	Type Foldable Yes
Platform - flat/straddle	Flat
Gear shift location - console/floor	PRT - Left-hand side

Compliance	Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility	360 degree (angle)
Air conditioning, temperature differential
Doors	Two
Noise rating	80 dBA
Seat equipment	Scissor-link

Wheelbase	172.7 cm 68 in.
Front axle clearance	30 cm 11.8 in.
Turning radius with brakes	2.7 m 8.8 ft
Turning radius without brakes	2.8 m 9.2
Limited slip differential
Approximate shipping weight (open-station; cab)	ROPS: 1315.4 kg 2900 lb Cab: 1619.3 kg 3570 lb

Front	Farm - 7-14 Turf - 27x8.50-15 Turf Special - 25/10.5LLx15 Industrial - 25x8.5-14 or 27x8.5-15
Rear	Farm - 11.2-24 Turf - 41x14-20 Turf Special - 41x18LL-16.1 Industrial - 15-19.5 or 43x16-20
Front tread range	114 cm 44.9 in.
Rear tread spacing	103.1 cm 40.6 in.

Toolbox
Tilt steering wheel
12-V Outlet

Accessories and Attachments