New John Deere HarvestLab™ 3000 HarvestLab™ and Constituent Sensing

Information Management
SCHEDULE A DEMO REQUEST A QUOTE
SCHEDULE A DEMO REQUEST A QUOTE
Key Features
  • On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar
  • Automatically adjust inoculant dosage based on current dry matter level
  • Automatically adjust length-of-cut, on the go
  • The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.
  • Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.

More Info

Features

One sensor, two applications

The HarvestLab™ 3000 sensor can be used for two different applications:

  • HarvestLab 3000 and John Deere Constituent Sensing on a John Deere self-propelled forage harvester
#

The HarvestLab 3000 sensor enables an accurate measurement and documentation of dry matter, starch, protein, neutral detergent fiber, and acid detergent fiber in different crop types. For better fertilization planning in the next season, operators can use the HarvestLab 3000 sensor to determine and document the nutrient values taken off the field during harvest. It also helps achieve higher quality forage by enabling automatic length-of-cut adjustments on the go to ensure an optimal bunker compaction and conservation. In addition, the smart use of additives ultimately leads to higher milk yields and more efficient use of feed.

    • Measure yield while harvesting
    • Accurately determine moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar on-the-go
    • Better determine the value of forage when purchasing for biogas operations
    • Dose inoculants based on current dry-matter level
    • Automatically adjust length of cut on the go 
  • Stationary application by adding a stationary kit to the HarvestLab 3000 and connecting it to a computer
HarvestLab 3000 equipped with the HarvestLab 3000 stationary kitHarvestLab 3000 equipped with the HarvestLab 3000 stationary kit

The HarvestLab 3000 sensor and stationary kit can provide time and cost savings with use in the barn, field office, or anywhere feed analysis is needed. For example, the components of a total mix ratio (TMR) can be measured every day to ensure the correct mix ration and achieve the maximum milk yield.

    • Monitor silage quality all year round
    • Support daily feed ration calculation
    • Determine moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar within 2 minutes

Measured data can also be downloaded from the HarvestLab 3000 sensor and saved to a computer for record-keeping purposes or to share with a nutritionist.

Real-time ingredient measurements on-the-go
HarvestLab™ 3000 mounted on spout of a John Deere 8000 Series Self-Propelled Forage HarvesterHarvestLab™ 3000 mounted on spout of a John Deere 8000 Series Self-Propelled Forage Harvester

Developed and patented with Carl-Zeiss, the HarvestLab™ 3000 sensor simultaneously measures the dry matter and various constituents of harvested crops. The HarvestLab 3000 uses the same near-infrared-reflectance (NIR) technology entrusted and used by most nutrition labs, but produces results instantly and with over 4000 readings per second. This provides producers with not simply one random sample value but statistically solid data on the go.

More accurate yield and ingredient documentation

HarvestLab™ 3000 sensor provides on-the-go yield, moisture and constituents data when used in conjunction with the Harvest Monitor™ system. This instantaneous information can then be recorded and documented by using the Harvest Doc™ mapping system and a StarFire™ 6000 Receiver.

 

Each operation is unique, but in general, silage harvested in a matter of days is expected to feed herds the entire year or be sold throughout the year.

 

Considering harvest conditions are never perfect and feed quality never improves after harvest or during storage, effective management and the ability to react quickly and efficiently becomes paramount.

 

The HarvestLab 3000 sensor allows producers to make informed management decisions at harvest and during storage in order to maximize silage and feed quality from the day it is harvested to the day it is fed or sold.

 

Much value stems from obtaining instantaneous yield, moisture, and constituent data. Producers are able to do the following:

  • Quickly identify if the crop has reached the optimal moisture to harvest
  • Prevent downtime while waiting for the moisture measurements via drying ovens
  • Automatically adjust the length-of-cut and inoculant levels to the optimal level
  • Optimize the bunk density and fermentation for heightened silage and feed quality
  • Segment the storage facilities based on the moisture or constituent content
  • Compare hybrid/variety productivity
  • Acquire dry volumes
  • Enhance invoicing and documentation
Constituent types
   Crop typeMoistureCrude protein (XP)SugarStarchAcid detergent fiber (ADF)Neutral detergent fiber (NDF)
Forage bundleCornFreshXX/XXX
EnsiledXX/XXX
HaylageFreshXXX/XX
EnsiledXXX/XX
Whole crop silageFreshXXX/XX
EnsiledXXX/XX

 

For further information regarding the constituents, see the John Deere Constituent Sensing sales manual.

Automated site specific documentation
#

Data recorded with the HarvestLab™ 3000 sensor on the forage harvester can be sent wirelessly to the John Deere Operations Center. Data is available to view in Field Analyzer after a field has been completed and new work has started, or approximately one half hour after field work has been stopped. Producers can analyze data from completed fields or view where field work is in process, making it easier for them to make operational decisions. Data is available for analysis from any internet-connected device to make important production decisions and gives operations the ability to invoice work recently completed.

Improved web user interface for stationary application
Improved web user interface in stationary applicationImproved web user interface in stationary application
HarvestLab™ 3000 equipped with the HarvestLab 3000 stationary kitHarvestLab™ 3000 equipped with the HarvestLab 3000 stationary kit

Easily connect the HarvestLab 3000 sensor with the HarvestLab 3000 stationary kit. The sensor can be removed from a forage harvester or manure tanker in a matter of minutes. The stationary kit offers a practical and easy-to-use solution to measure forage quality away from the John Deere self-propelled forage harvester.

  • Monitor silage quality all year round
  • Better determine the value of forage when purchasing for biogas operations
  • Support daily feed ration calculation
  • Determine dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar within 2 minutes
  • Supply power with 12-V cigarette lighter adapter for mobile use

Operate the stationary application using the intuitive web-user interface, including improved measurements procedure with detailed step-by-step explanations. Store measurements or export them in the CSV format.

AutoLoc™ system
John Deere 8000 Series Self-Propelled Forage Harvest (SPFH) with HarvestLab™ 3000 and AutoLocJohn Deere 8000 Series Self-Propelled Forage Harvest (SPFH) with HarvestLab™ 3000 and AutoLoc
  1. HarvestLab 3000
  2. Manual control (operator)
  3. AutoLoc — automatic length-of-cut control
  4. Infinitely variable length of cut (IVLOC™) — length-of-cut changes on-the-go

Save up to 5 percent fuel while increasing throughput leveraging AutoLoc.

 

AutoLoc, a feature exclusive to John Deere, brings added value to the HarvestLab moisture sensor and John Deere self-propelled forage harvester (SPFH). AutoLoc works in conjunction with the HarvestLab 3000 sensor and IVLOC to automatically adjust the length of cut based on crop-moisture levels to improve bunk density. Nutritionists, herdsmen, and SPFH operators will all benefit from this innovation.

 

John Deere is leading the industry in providing real-time information that matters most to forage production. Quality forage comes from properly packed silage, which is directly related to the moisture content and length of cut of the crop.

 

Length-of-cut changes are made automatically in the field based on moisture readings and predetermined settings determined by operator requirements. No in-field calibration is required to load the length-of-cut (LOC) requirements; the operator simply uses the GreenStar™ display to program the desired LOC settings at different moisture levels.

 

When moisture levels of crop in the field change, the hydrostatic IVLOC feedroll drive automatically responds to either an increase or decrease the feedroll speed, which in turn changes the LOC. If moisture levels of the crop are outside of the desired range, IVLOC adjusts and limits the LOC, based on the maximum and minimum LOC settings, as determined by the operator.

AutoLoc screenAutoLoc screen

Accessories and Attachments

AutoTrac Integrated Machine Kits

AutoTrac Combine Machine Kit - 50 Series (PIN 695101 and Above) - PF90876
AutoTrac Combine Machine Kit - 60 Series - PF90875
AutoTrac Combine Machine Kit - 70 Series - PF90629
AutoTrac Electrical Connector Assembly - 7020 or 7015 Models - PF90495
AutoTrac Sprayer Machine Kit - 4700 Models - PF90320
AutoTrac Sprayer Machine Kit - 4710 Models (PIN 003999 and Below) - PF90810
AutoTrac Sprayer Machine Kit - 4710 Models (PIN 004000 and Above) - PF91109
AutoTrac Sprayer Machine Kit - 4720 Models - PF90808
AutoTrac Sprayer Machine Kit - 4730 or 4830 Models - PF90633
AutoTrac Sprayer Machine Kit - 4920 (PIN 004000 and Above) or 4930 Models - PF90809
AutoTrac Sprayer Machine Kit - 4920 Models (PIN 003999 and Below) - PF90811
AutoTrac Tractor King Pin Kit - 6105R, 6115R, 6125R or 6130R (IT4) Models with MFWD - BPF10616
AutoTrac Tractor King Pin Kit - 6140R or 6150R Models with MFWD - BPF10560
AutoTrac Tractor Machine Kit - 6030 or 7030 Premium Series with MFWD - BPF10039
AutoTrac Tractor Machine Kit - 6105R, 6115R, or 6125R Models with MFWD - BPF10513
AutoTrac Tractor Machine Kit - 6130R (FT4), 6120R, 6110R models with MFWD - BPF10989
AutoTrac Tractor Machine Kit - 6135R model with MFWD - BPF10987
AutoTrac Tractor Machine Kit - 6140R or 6150R Models with MFWD - BPF10387
AutoTrac Tractor Machine Kit - 6145R, 6155R models with MFWD - BPF10985
AutoTrac Tractor Machine Kit - 6170R, 6190R or 6210R Models with MFWD - BPF10345
AutoTrac Tractor Machine Kit - 6175R, 6195R and 6215R models with MFWD - BPF10683
AutoTrac Tractor Machine Kit - 6420 Models with MFWD - PF90568
AutoTrac Tractor Machine Kit - 7020 or 7015 Models with MFWD - PF90496
AutoTrac Tractor Machine Kit - 7220 or 7320 Models with MFWD - PF90569
AutoTrac Tractor Machine Kit - 7420 or 7520 Models with MFWD - PF90570
AutoTrac Tractor Machine Kit - 7630, 7730, 7830 or 7930 Models with MFWD - PF90894
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and IVT Transmission - PF90891
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and PowrQuad Transmission - PF90893
AutoTrac Tractor Machine Kit - 7920 Models with MFWD and IVT Transmission - PF90892
AutoTrac Tractor Machine Kit - 8000 Series with MFWD - PF90863
AutoTrac Tractor Machine Kit - 8000T Series - PF90396
AutoTrac Tractor Machine Kit - 8010 Series with MFWD - PF90862
AutoTrac Tractor Machine Kit - 8010T Series (All PINs) or 8020T Series (PIN 902000 and Below) - PF90395
AutoTrac Tractor Machine Kit - 8020 Series with ILS - PF90861
AutoTrac Tractor Machine Kit - 8020 Series with MFWD - PF90497
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40 km/h (PIN 005466 and Below) - PF90818
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40km/h (PIN 005467 and Above) - PF90820
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005466 and Below) - PF90817
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005467 and Above) - PF90819
AutoTrac Tractor Machine Kit - 9000 Series Wheel (PIN 039999 and Below) with Manual Shift Transmission - PF90311
AutoTrac Tractor Machine Kit - 9000 Series Wheel with Manual Shift Transmission (PIN 040000 and Above) or 9020 Series Wheel with Power Shift Transmission (PIN 001703 and Below) or 9020 Series Wheel with Steel Gudgeon (PIN 010443 and Below) - PF90670
AutoTrac Tractor Machine Kit - 9000T Series (PIN 902000 and Below) - PF90397
AutoTrac Tractor Machine Kit - 9000T Series (PIN 902001 and Above) or 9020T Series (PIN 901171-902000) - PF90398
AutoTrac Tractor Machine Kit - 9020 Series Wheel with Steel Gudgeon (PIN 010444 and Above) or 9020 Series Wheel with Cast Gudgeon (All PINs) - PF90671
AutoTrac Tractor Machine Kit - 9020T Series (PIN 901170 and Below) - PF90399
AutoTrac Tractor Machine Kit - 9030 Series Wheel Scraper Tractor - PF90849
AutoTrac Tractor Machine Kit - 9R Series Wheel Scraper Tractor - BPF10629
AutoTrac Tractor Machine Kit - 9RT Series Scraper Tractor - BPF10631
SPFH Guidance Base Kit - 7000, 7050 and 7080 Series - BZ100194
SPFH Guidance Base Kit - 7000, 7050 and 7080 Series - BZ100079
SPFH SSU Controller - 7000, 7050 and 7080 Series - BZ100196

AutoTrac RowSense Kits for Mechanical Feelers

AutoTrac RowSense Mechanical Feelers (20 In. Row Spacing) - PF90699
AutoTrac RowSense Mechanical Feelers (22 In. Row Spacing) - PF90700
AutoTrac RowSense Mechanical Feelers (30 In. or 75 cm Row Spacing) - PF90697
AutoTrac RowSense Mechanical Feelers (45 cm Row Spacing) - Argentina and Brazil - BPF10266
AutoTrac RowSense Mechanical Feelers (70 cm Row Spacing) - PF90698
AutoTrac RowSense Retrofit Kit - Combine - PF90755
AutoTrac RowSense Retrofit Kit - Corn Head - PF90757

AutoTrac RowSense Kits for Universal Sensor

AutoTrac RowSense Kit for Universal Sensor - Combine - PF90742
AutoTrac RowSense Universal Sensor - PF91001
Case IH Corn Head Mounting Hardware - 2200/2400/3200/3400 Series 30" - PF90844
Drago Corn Head Mounting Hardware - All Series 30" - PF90977
Geringhoff Corn Head Mounting Hardware - NorthStar or Rota Disc Series 30" - PF90978
John Deere Corn Head Mounting Hardware - 600 Series 30" and 75cm - PF90843
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY1994-2001) - PF91002
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY2002-2007) - PF90794

AutoTrac Universal Supplemental Kits

AutoTrac Universal Auxiliary Resume Switch - PF90453
AutoTrac Universal Guidance Harness Kit - BPF11129
AutoTrac Universal Horn Kit - PF90452
AutoTrac Universal Hub and Anti-Rotation Bracket - PF90560
AutoTrac Universal Hub, Anti-Rotation Bracket and Hardware - PF90476
AutoTrac Universal Hub, Auto-Rotation Bracket and Horn Switch Kit - PF90565
AutoTrac Universal Original GreenStar Display Slotted Bracket - PF90449

Device Connectivity

Ethernet Switch - BPF10746

GreenStar Brackets

Bracket - GreenStar Dual Display - PF90430
Combine StarFire Position Receiver Bracket - 50 Series - PF10758
Combine StarFire Position Receiver Bracket - 60 Series - AH211594
Deluxe Shroud Conversion Bracket Kit - 6020 or 6030 Series or Small Frame 7000, 10, 20, or 30 Series Tractors - PF90780
Deluxe Shroud Conversion Bracket Kit - 9000 (MY1990 and Newer), 10, 50, 60 or 70 Series Combines; 7760, 9986 or 9996 Cotton Pickers or 7460 Cotton Strippers - PF91009
Deluxe Shroud Conversion Bracket Kit - Large Frame 7000/8000/9000 Model Tractors or 4700/4800/4900 Model Sprayers. For Series 00, 10, 20 or 30. - PF91010
Deluxe Shroud Conversion Bracket Kit - RTK Base Station/Tripod - PF90781
GreenStar Bracket Kit - 60 or 70 Series Combines and 4095 or 400 Series Windrowers - PF90500
GreenStar Display Cornerpost Bracket - S-Series Combines - BPF11186
GreenStar SPFH Bracket Kit - AZ103900
GreenStar Tractor Bracket Bundle - 6B Tractors - BPF11167
GreenStar Tractor Bracket Kit - 7630-7930 Models and 8030 Series - PF90408
GreenStar Tractor Bracket Kit - 7720-7920 Models and 8000, 8010, 8020 Series - PF90198
GreenStar Tractor Bracket Kit - 9020 Series - PF90409
GreenStar Tractor Bracket Kit - 9020 Wheel or 9020 Track Series - PF90199
GreenStar Tractor Harness Bundle - 6B Tractors - BPF11184
John Deere AutoTrac Controller Bracket - BPF10472
Mounting Kit (Supplemental) - GreenStar 3 or GreenStar 2 Display - PF90416
Mounting Kit (Supplemental) - GreenStar 3 or GreenStar 2 Display Control - PF90415
Position Receiver Bracket and Connector Kit - PF90758
Sprayer StarFire Position Receiver Bracket - 4930 or 4720 Models - RE221798
StarFire Receiver Bracket Bundle - BPF11185
StarFire Receiver Bracket Kit - (MY13-MY16) 6M Tractors - BPF11274
StarFire Receiver Deluxe Shroud - PF90739
StarFire Receiver Universal Mounting Bar Kit - BPF11356

GreenStar Implement Control Kits

Active Implement Guidance Counterbalance Valve - BPF10548
Active Implement Guidance External Valve Bracket Kit - BPF10352
Active Implement Guidance Implement Feedback Harness (4 Meter) - BPF10032
Active Implement Guidance Implement Feedback Harness Extension (9 Meter) - BPF10019
Active Implement Guidance Implement Feedback Sensor - BPF10024
Active Implement Guidance or iGrade Closed Center Valve - BPF10383
Active Implement Guidance or iGrade External SCV Switch and Harness Kit - BPF10356
Active Implement Guidance or iGrade Open Center Valve - BPF10382
Auxiliary Power Extension Harness (21 meter) - PF90593
Bracket Assembly - John Deere 2510 Series Applicators - PF90826
CAN Front Extension Harness (12 meter) - PF90553
Center Extension Harness (2 meter) - PF90588
Center Extension Harness (8 meter) - PF90589
Front Extension Harness (10 meter) - BPF11284
Front Extension Harness (3 meter) - BPF11285
High Current Power Adapter Harness - 4WD Tractor - PF90822
High Current Power Adapter Harness - Row Crop Tractor - PF90795
High Current Power Extension Harness (10 meter) - PF90824
High Current Power Extension Harness (3 meter) - PF90825
Implement Mast - For universal use on 3", 4", 5" or 6" Frame Tubes - PF90523
Implement Mast - For universal use on 7" or 8" Frame Tubes - PF90524
Implement Mast - John Deere CCS Planter With Refuge Plus Tank (MY2006 and Newer) - PF90549
Implement Mast - John Deere CCS Planter Without Refuge Plus Tank (MY2004 and Newer) - PF90525
Implement Receiver Harness - PF90538
John Deere Application Controller Mounting Hardware - 6R - BPF10940
John Deere Application Controller Mounting Hardware - 7R - BPF10732
John Deere Application Controller Mounting Hardware - 8000, 8010 and 8R Wheeled Series Tractors  - BPF10041
John Deere Application Controller Mounting Hardware - 8000T and 8010T Series Tractors - BPF10020
John Deere Application Controller Mounting Hardware - 8020 Wheeled Series Tractors - BPF10022
John Deere Application Controller Mounting Hardware - 8020T Series Tractors - BPF10021
John Deere Application Controller Mounting Hardware - 8RT Series Tractors - BPF10042
John Deere Application Controller Mounting Hardware - 9000 and 9020 Wheeled and Track Series - BPF10023
John Deere Application Controller Mounting Hardware - 9R with Standard Hydraulics - BPF11173
Power Extension Harness (11 meter) - PF90592
Power Harness - 4WD Tractor - BPF10404
Power Harness - Row Crop Tractor - BPF10403
Rear Extension Harness (2 meter) - PF90591
iGrade Counterbalance Valve - BPF10547
iGrade or Active Implement Guidance Implement CAN Extension Harness - BPF10018
iGrade or Surface Water Pro Implement Mast - PF90674
iGrade or Surface Water Pro Receiver Mounting Kit - PF90676

GreenStar Miscellaneous Hardware

GreenStar Lightbar - BPF10028
GreenStar/Gen 4 10" Display Touch Panel Protector Service Kit - PF90596

GreenStar and Gen 4 Harnesses

GreenStar Ready Harness Kit - 6M (MY16) FT4 Cab - BPF11333
GreenStar Ready Universal Guidance Kit, Upgradeable - John Deere or Competitive Models  - BPF10139
Harness - Field Doc Connect - PF90277
Harness - GreenStar 3 or GreenStar 2 Display to Original GreenStar Machine Connector - PF90688
Harness - GreenStar 3 or GreenStar 2 Third Party Controller Kit - PF90363
Harness - GreenStar Desktop Bundle - PF90701
Harness - GreenStar ISO Implement - Row Crop Tractors - RE174725
Harness - GreenStar Lightbar (Right-Hand Console) - PF90727
Harness - GreenStar Lightbar (Stand-Alone) - PF90728
Harness - GreenStar Lightbar 4 Pin Extension - PF90937
Harness - GreenStar Lightbar to Mobile Guidance Kit (Adapter) - PF90902
Harness - GreenStar Mobile Guidance Kit - John Deere or Competitive Models - BPF10302
Harness - GreenStar and John Deere 4640 Universal Display - 35 Foot Extension - PF90768
Harness - John Deere 4640 Universal Display, GreenStar 2, and GreenStar 3 Displays 19 way to 26 way Connector - PF90687
Harness - Original GreenStar Display and Mobile Processor to GreenStar 3 or GreenStar 2 (Round) Cornerpost - PF90686
Harness - StarFire 300 (.60 Meter) - PF90858
Harness - StarFire 300 (1.8 Meter) - PF90857
Harness - StarFire Position Receiver Extension (30 cm) - BPF10200
Harness - StarFire Position Receiver Radar Adapter - PF90350
Harness - StarFire Position Receiver to Cab Roof Bulkhead Connector - PF80722

Harvest Sensor Kits

Combine Moisture Sensor Conversion Kit - PF90226
Combine Moisture Sensor Retrofit Kit - 50 Series - PF90872
Combine Sensor Kit - 50 Series - PF90874
Combine Sensor Kit - 60 or 70 Series - PF90873
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 639999 and Below) - PF90866
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 640000 and Above) - PF90867
Combine Sensor Kit - 9410, 9510, or CTS II Models - PF90871
Combine Sensor Kit - 9410, 9510, or CTS II Models (PIN 675000 and Above) - PF90870
Combine Sensor Kit - 9600 Models (PIN 639999 and Below) - PF90864
Combine Sensor Kit - 9600 Models (PIN 640000 and Above) - PF90865
Combine Sensor Kit - 9610 Models - PF90869
Combine Sensor Kit - 9610 Models (PIN 675000 and Above) - PF90868
Cotton Stripper Harvest Doc Kit - 7460 Model - BPF10237
Cotton Yield Sensor Kit - 9986 or 9996 Models (6-Row ONLY) - PF90882

Machine Communication Radio

Machine Communication Radio All Makes Kit - BPF10776

Machine Control

Combine Hydro Handle for Machine Sync Application - BPF10405
John Deere Machine Sync 3/4 Bin Fill Kit - 70 Series Combine (MY'08 or MY'09) - BPF10504

StarFire RTK Kits

Base Station Kit for RTK Radio 900 - BPF10838
Base Station Kit for RTK Radio 900 with Tripod - BPF10837
Hi-Gain Base Antenna - PF91105
In-Line Amplifier - PF91101
John Deere RTK Radio Cover - PF90740
Magnetic Rover Antenna - John Deere RTK Radio 450 - PF91102
Magnetic Rover Antenna - John Deere RTK Radio 900 - PF90347
RTK Base Station Extension Harness - 20 Ft. - PF90884
RTK Conversion Bundle for mounting old style StarFire Position Receiver - PF90332
RTK Dual Radio Harness - BPF10029
RTK Radio Extension Harness - 300 Ft. - PF90401
RTK Radio Extension Harness - 50 Ft. - PF90450
RTK Tripod with Labels - PF90886
RTK Universal Base Station Bundle 450 - PF91099
RTK Universal StarFire Mounting Bracket - PF90885
Repeater Kit for RTK Radio 900 - BPF10839