The machine is powered by an 854-cc (52.1-cu in.), 3-cylinder, liquid-cooled, four-cycle diesel engine. It produces 48 Nm of torque (35.5-lb-ft) of torque at 2600 rpm.
The advanced engine delivers superb starting, idling, and throttle response during operation.
The engine offers the following performance and reliability features:
* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.
This Gator™ XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:
Electric power-assist steering (EPAS) system has advanced features:
With the EPAS system, the operator maintains a direct mechanical linkage from the steering wheel to the front wheels. The power steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.
A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power steering assembly.
Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to models without power steering.
The numbered descriptions refer to the EPAS interface diagram shown above:
Whether it is a completely open operator station or a factory installed cab, the interior has been redesigned with comfort and ergonomics in mind.
On M- and R-trim vehicles, adding attachments and accessories is made easier by the inclusion of some main wiring harnesses that facilitate efficient hook-up.
The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise.
The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.
The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.
The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.
A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.
The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:
Optional accessories for the deluxe cargo box:
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.
To complement the robust frame, the XUV is equipped with four-wheel independent suspension.
A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.
The entire suspension system has been optimized to handle cargo without compromising ride quality or vehicle stability.
M-trim cab units (factory installed) and R-trim units have heavy-duty front and rear shocks installed from the factory.
Dual A-arm independent rear suspension features include:
The Gator™ XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously-variable clutch system to the transaxle.
Key elements of the drive system include:
The variable-speed drive consists of two clutches and a drive belt:
NOTE: Delivery and torque to the ground depends on tire size, which is a function of nominal size and pressure.
How the variable-speed drive works:
Operator interface features:
NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels.
Drive shaft features:
The M trim adds electrical power-assist steering (EPAS) and brings in the main wiring harness for easier attachment hook-up. Cabs are available in this trim level. Heating, ventilation, and air conditioning (HVAC) is also an option within the M-trim level.
Select up to 2 models to compare specifications
The AMS integration kit allows the operator to mount their StarFire Receiver and GreenStar (GS) display (both receiver and display sold separately) to their Gator™ Utility Vehicle.
The back-up alarm kit alerts pedestrians when the Gator™ is operating in reverse:
The rear bumper offers stylish, heavy-duty rear protection to the vehicle.
The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.
The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.
The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.
The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.
Product features include:
NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.
The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.
Easily mount a spare tire to the side of the cargo box with this convenient kit.
Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.
Available through Order Zone
The Gator™ XUV Series can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to these highly capable utility vehicles.
Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.
The deluxe cargo box cover easily installs without tools and keeps the cargo secure and protected from the elements. It is compatible with Gator Utility Vehicles equipped with the all-new deluxe cargo box. Compatible with all model year 2011 - current Gator XUV 625i, XUV 825i, XUV 855D, TX, TX Turf, TH 6X4, TE, M-Gator™ A2, and M-Gator A3 Utility Vehicles. Compatible with all model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.
Ordering information Please contact your local John Deere dealer for availability and pricing information.
Deluxe cargo box cover - Camo Order number: LP19879
The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.
The ball hitch is available through Service Parts.
NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.
Available through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
UL is a trademark of UL LLC.
The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.
Kit includes two comfort straps for the left and right seat belts.
Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.
For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.
Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.
The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.
90 days, limited.
RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of Samsung Electronics Co.
RAM is a trademark of National Products, Inc.
NOTE: Must order head unit through Parts.
Jensen is a trademark of Electronics Trademark Holding Company LLC. SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc.
NOTE: Must oder head unit through Parts.
Bluetooth is a trademark of Bluetooth SIG, Inc. SiriusXM is a trademark of Sirius XM Radio Inc. Jensen is a trademark of Electronics Trademark Holding Company LLC.
Cordura is a trademark of INVISTA North America S.à.r.l.
Quality constructed from 16 gauge steel, this industrial tool box is durable enough to handle wear and tear even from the toughest contractors. This tool box keeps tools, equipment, and other valuables secure, clean, dry, and protected from outside elements - due to full weather seal locks and a rust-resistant, powder-coat paint application. Twin commercial-grade gas shocks automatically lift lid for effortless one-handed open/close. Comes complete with key locks to guard against theft.Product attributes:
Ordering informationPlease contact your local John Deere dealer for availability and pricing information.
Gator tool boxOrder number: LP19886
This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Side-door opening toolbox features:
Side-door opening toolbox
29 kg (64 lb)
34 kg (75 lb)
-Full box: 109.4-cm (43.1-in.) long X 35-cm (13.8–in.) wide X 32.5-cm (12.8–in.) tall
-125-L (33-gal) total volume
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
This toolbox is compatible with the following Gator™ Utility Vehicle models:
This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).
The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.
Optional label kits are designed to fit with this tailgate:
The tailgate is compatible with the following Gator™ utility vehicle models:
Top door opening toolbox features:
Top door opening toolbox
32.7 kg (72 lb)
32.7 kg (75 lb)
-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall
-125-L (33-gal.) total volume
NOTE: Not intended for use on public roadways.
WARN is a trademark of WARN Industries, Inc.
Double the pulling power, change the pulling direction, and keep the winch in proper working order.The accessories kit is essential gear for operators getting the most out of their winch:
The accessories kit includes:
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Monthly Loan Payment:
Total of principal plus Interest:
**The accuracy of this calculator and its applicability to your circumstances is
not guaranteed. You should obtain personal advice from qualified professionals.
This information is provided for illustrative purposes only and does not constitute
an application. This notice does not guarantee loan approval, nor is it an offer
or commitment to make a loan to you on the above terms.
All fields marked with * are required.